top of page

Centrifugal Iso-Finishing for Precision Part Deburring and Finishing

by Contributing Editor: Dave Davidson, Deburring/Finishing Technologist | 509.230.6821

dryfinish@gmail.com | https://about.me/dave.davidson

If you have parts that need edge or surface finishing improvement and would like to have FREE sample part processing and a quotation developed for finishing the parts please contact Dave Davidson at dryfinish@gmail.com I can also be reached at 509.230.6821 Information about equipment for bringing Centrifugal Iso-Finishing Equipment to your facility is also available...

Centrifugal barrel finishing (CBF) or Centrifugal Iso-Finishing is a high-energy finishing method, which has come into widespread acceptance in recent years. Although not nearly as universal in application as vibratory finishing, a long list of important CBF applications have been developed in the last few years.

Similar in some respects to barrel finishing, in that a drum-type container is partially filled with media and set in motion to create a sliding action of the contents, CBF is different from other finishing methods in some significant ways.

Among these are the high pressures developed in terms of media contact with parts, the unique sliding action induced by rotational and centrifugal forces, and accelerated abrading or finishing action. As is true with other high energy processes, because time cycles are much abbreviated, surface finishes can be developed in minutes, which might tie up conventional equipment for many hours.

bottom of page