top of page

Centrifugal Iso-Finishing: Free Sample Part Processing Request Form


Centrifugal Iso-Finishing Equipment and Processing

Accelerate and streamline your deburring and finishing operations. This equipment comes in sizes from 12 liters (0.4 cubic foot) to large 330-liter machines (12.8 cubic feet) with 12-inch diameter barrels with 42-inch barrel lengths. Wet and dry media can be used for either aggressive abrasive deburring and smoothing operations or final super-finishing and polishing operations.

The (free) Centrifugal Iso-Finishing sample processing program is a way you can make an evaluation on how well Centrifugal Iso-finishing will meet your part deburring, finishing and polishing needs. It is a simple matter of filling out a form to give us your contact information and some information about the parts to be finished. It is as simple as 1-2-3.

(1) Email me some smart-phone photos of the parts so I can make an initial assessment (send to ddavidson@deburring-tech-group.com) then fill out the form and email it to me. (You can download a WORD document copy from this link: https://drive.google.com/open?id=1keeUL_GVcLQrPiLZXfQXAiOurRyHeY745c6JHDNpCzk

(2) Select the parts to be sample finished, package them and include a paper copy of the form that you emailed to me. Be sure to send the parts to the sample part processing facility address on the form, not to my office address.

(3) Mail or ship the package by US Mail, UPS or FedEx. Email me the tracking information so that I can monitor the shipment. If you are at a location outside of the United States, or you need expedited shipping, please supply us with your shipping account number so we can expedite the shipment to your location.

 

Sample Part Processing Intake Form

The parts should be sent to:

MFI (Process Engineering Services)

attn: T. Mathisen and D. A. Davidson

1060 Commerce Street

Howard Lake, MN 55349​​

 

Instructions: To use the form below, please cut and paste to your email. Please complete the form and return to Dave Davidson via Email to ddavidson@deburring-tech-group.com

 

DATE:

COMPANY:

Contact Person

Email Address:

Telephone:

Delivery Address:

City:

State/Province

Postal Code:

Country:

PART INFORMATION:

Part Name and Description:

Part Material

Part Dimensions: L" x W' x D' or Length x Diameter

PRODUCTION or PROJECTED PRODUCTION QUANTITIES

Parts per shift

Parts per month

No. of Sample Parts included with this shipment?

Expedited shipping to return parts? Y/N

Expedited Shipping via.

Your company account No.

Manufacturing operation(s) prior to finishing:

Post-Finishing operations

Description of Part Finishing Needs or Requirements:

Radius or Surface Finish requirement or specification:

Additional Notes or Comments:

PLEASE ATTACH PHOTO OF PARTS IF POSSIBLE (Smart-phone Photos are OK) to your return Email to ddavidson@deburring-tech-group.com

Dave Davidson

Deburring/Finishing Technologist

SME Tech Community Advisor

ddavidson@deburring-tech-group.com

+1.509.563.9859

Free Sample Processing

Contract Deburring and Finishing Services

High Energy Finishing Equipment and Process Development

bottom of page