top of page

Centrifugal Iso-Finishing: Hands-Free and High Speed Edge and Surface Finishing and Post-Processing

by Dave Davidson, Deburring/Finishing Technologist | 509.563.9859

If you have parts that need edge or surface finishing improvement and would like to have FREE sample part processing and a quotation developed for finishing the parts please contact Dave Davidson at ddavidson@deburring-tech-group.com I can also be reached at +1.509.563.9859. Information about equipment for bringing Centrifugal Iso-Finishing capability to your facility is also available...

Small parts can offer significant challenges for the deburring and finishing operations of many manufacturers. Centrifugal Iso-Finishing is used to develop fine finishes across a wide spectrum of small parts from various industries. The processes minimize or eliminate hand-work and are capable to developing very fine finishes that rival hand polishing. For sample part processing information email us at ddavidson@deburring-tech-group.com

ABOVE: See the Model HZ-12 machine in operation. This compact 110 volt machine, when equipped with the optional roller stand can be easily moved within the plant from location to location as needed. It is heavily utilized in the dental industry for fine finishing and polishing of dental parts and implants, and is used for polishing of jewelry and small screw machine parts as well.

ABOVE: This video shows operations of the HZ-40 machine which has been long a staple of the production jewelry and small part industries. Many manufacturers of both plastic and metal 3D printed parts use this machine for their post-processing needs for surface finishing and polishing

The Model HZ-60 is more of a full-scale industrial production machine with many material handling features not found in the smaller models. Among these are integrated part separation and handling, as well as the ability to run higher volumes of parts in their own segregated compartments or pockets, thus eliminating any possibility of part damage from in-process part on part contact or collision.

See below some of small part applications which are supported by this type of high-speed mass finish processing. The machines are able to effectively utilize much smaller dimensional abrasive and media shapes than conventional finishing equipment.

Below are show some examples of machine operations...

If you have any questions, or if there is any way I can be helpful, please let me know...

Dave Davidson | Deburring/Finishing Technologist | ddavidson@deburring-tech-group.com

About Dave Davidson I am a deburring and surface finishing specialist, consultant and advisor to SME's [Society of Manufacturing Engineers] Technical Community Network. The focus of my activity is assisting manufacturers and machine shops with reducing their dependence on hand or manual deburring and finishing methods, and helping them to upgrade the edge and surface finish quality of their parts. I currently work from Colville, WA but I assist clients nation-wide. I can arrange for free sample processing and process development for your challenging deburring and finishing needs and can provide you with either contract finishing services or the in-house capability to produce improved hands-free finishes on precision parts. I can be contacted at 509.563.9859 or ddavidson@deburring-tech-group.com Let me know if I can be helpful.

Please also take a look at the updated information on our (free) sample processing and process engineering services: https://partsfinished.wordpress.com/2018/06/30/centrifugal-iso-finishing-free-sample-processing-request-f/


Free Sample Processing Contract Deburring and Finishing Services High Energy Finishing Equipment and Process Development


bottom of page