top of page


Mass Finishing Processes Explained
For more information or assistance with sample part processing for your parts contact the Contributing Editor: Dave Davidson,...


Turbo-Finish for Lean Deburring and Finishing of Complex Rotating Parts
For information about the Turbo-Finish deburring and finishing technology contact: Dr. Michael Massarsky | Turbo-Finish Corp....


PRECISION MACHINED COMPONENTS: Meeting the Lean Deburring and Finishing Challenge – Case Study
Contributing Editor: Dave Davidson: | dryfinish@gmail.com | 509.563.989 https://dryfinish.wixsite.com/iso-finish |...


High-Speed Isotropic Surface Processing of Racing Engine Components for the Motorports Industry Impr
Above: Isotropic Micro-Finishing Photography by Mark Riley, BV Products Dave Davidson: Contributing Editor | dryfinish@gmail.com |...

![“Compiled Problems Caused by Burrs and Sharp Edges.” [Aerospace Industry] by LaRoux Gillespie, CMfgE](https://static.wixstatic.com/media/cbd284_049f114aba5343b385fa693ec7f2008d~mv2.jpg/v1/fill/w_960,h_759,fp_0.50_0.50,q_90,enc_avif,quality_auto/cbd284_049f114aba5343b385fa693ec7f2008d~mv2.webp)
“Compiled Problems Caused by Burrs and Sharp Edges.” [Aerospace Industry] by LaRoux Gillespie, CMfgE
INDEX TERMS: Deburring, Edge Contour and Finish, Isotropic Surfacing, Mass Media Finishing, Nontraditional Finishing,...


Porcelain Media for High Quality Burnished Surfaces in Centrifugal Isotropic Finishing Processes
Porcelain Media Dave Davidson | dryfinish@gmail.com | https://dryfinish.wordpress.com Porcelain polishing media is typically used to...


Plastic abrasive media for fine finishing and smoothing in Centrifugal Isotropic Finishing Processes
Plastic MediaDave Davidson | dryfinish@gmail.com |http://dryfinish.wordpress.com Plastic Smoothing and Abrasive Finishing Media Plastic...


Centrifugal Isotropic Finishing Media – Ceramic Preformed Shapes and Random Shapes
Contributing Editor: Dave Davidson, Deburring/Finishing Technologist | 509.230.6821 | dryfinish@gmail.com | https://about.me/dave.davids...


Next Generation Finishing Technology for Gears and Other Cooperating Parts
ABOVE: Isotropic Micro-Finishing Photography by Mark Riley, BV Products Ray Chalmers Interview with Dave Davidson, Deburring/Finishing...


Isotropic Mass Finishing Processes for Surface Integrity and Part Performance Improvement
[ABOVE: Isotropic Micro-Finished Part photography by Mark Riley, BV Products] by Dave Davidson, Deburring/Finishing Technical Group and...
bottom of page