top of page


Top 20 Facts About Manufacturing according to the NAM (National Association of Manufacturers)
In the most recent data, manufacturers contributed $2.18 trillion to the U.S. economy in 2016. This figure has risen since the second...


High-Speed Dry Spindle Deburring and Finishing of Complex Part Shapes
Featured Photo above: Machining and broaching operations on aerospace rotating hardware can develop significant burr and sharp edge...

![Super-Finishing High Performance Automotive Components [Connecting Rods] with Centrifugal Isotropic](https://static.wixstatic.com/media/cbd284_66be602d433c42c0bc52b2e78149bb6f~mv2.jpg/v1/fill/w_960,h_720,fp_0.50_0.50,q_90,enc_avif,quality_auto/cbd284_66be602d433c42c0bc52b2e78149bb6f~mv2.webp)
Super-Finishing High Performance Automotive Components [Connecting Rods] with Centrifugal Isotropic
Contributing Editor: Dave Davidson | Deburring/Surface Finishing Technologist ddavidson@deburring-tech-group.com |...


Change of Surface Stresses (tensile vs. compressive) with Centrifugal Isotropic Finishing
ABOVE: Â Isotropic Micro-Finishing Photography by Mark Riley, BV Products For process development assistance and free sample processing...


Stock and Material Removal with High Energy Centrifugal Isotropic Finishing
Edited by Dave Davidson | Deburring/Finishing Specialist | dryfinish@gmail.com Excerpted from SME Technical Paper MR79-569 by J. Bernard...


Changing Surface Stress in Machined and Manufactured Parts
Above: Isotropic Micro-Finishing of High-Performance Crankshafts, Photo by Mark Riley, BV Peoducts Edited by Dave Davidson |...


Some Typical Parts Finished with High Energy Finishing
FREE SAMPLE PROCESSING * CONTRACT FINISHING SERVICES * TURN-KEY FINISHING SYSTEMS For additional information or sample processing...


Vibratory Edge and Surface Finishing – Evolving Requirements and Processes (Part 2)
The capacity of tub-style vibratory equipment makes it possible to develop uniform edge contour and surface finish on larger components...


Isotropic Surface Finishes with Vibratory Finishing
These impeller parts have been isotropically finished and then polished in a two stage process with centrifugal isotropic finishing...


Vibratory Edge/Surface Finishing – Evolving Requirements and Processes (Part 1)
Mass media finishing processes have gained widespread acceptance in many industries, primarily as a technology for reducing the Figure 1...
bottom of page