top of page


High-Energy Centrifugal Iso-Finishing Contract Services for Deburring and Super Iso-Finishing. Infor
For additional information contact the Contributing Editor: Dave Davidson, Deburring/Finishing Technologist | 509.563.9859 |...

![Super-Finishing High Performance Automotive Components [Connecting Rods] with Centrifugal Isotropic](https://static.wixstatic.com/media/cbd284_66be602d433c42c0bc52b2e78149bb6f~mv2.jpg/v1/fill/w_960,h_720,fp_0.50_0.50,q_90,enc_avif,quality_auto/cbd284_66be602d433c42c0bc52b2e78149bb6f~mv2.webp)
Super-Finishing High Performance Automotive Components [Connecting Rods] with Centrifugal Isotropic
Contributing Editor: Dave Davidson | Deburring/Surface Finishing Technologist ddavidson@deburring-tech-group.com |...


Understanding Surface Finishing’s Role in Part Performance and Service Life Improvement
Contributing Editor: Dave Davidson, Deburring/Finishing Technologist 509.563.9859 ddavidson@deburring-tech-group.com | https://dryfinis...


Centrifugal Iso-Finishing and cutting tool edge improvement
ASK ABOUT:FREE SAMPLE PROCESSING | EQUIPMENT | CONRACT FINISHING Contributing Editor: Dave Davidson | Deburring/Surface Finishing...


Change of Surface Stresses (tensile vs. compressive) with Centrifugal Isotropic Finishing
ABOVE: Isotropic Micro-Finishing Photography by Mark Riley, BV Products For process development assistance and free sample processing...


Isotropic Mass Finishing for Surface Integrity and Part Performance
(Photo above: Isotropic Micro-Finishing, Photo by Mark Riley, BV Products) by Jack Clark, Surface Analytics, jack.clark@woodward.com and...


Dry Mechanical Edge and Surface Finishing for Rotating Aerospace Components
by Dr. Michael Massarsky | Turbo-Finish Corporation | 917.518.8205 | michael@turbofinish.com and Dave Davidson | SME Technical Community...


Centrifugal Isotropic Finishing for Improved Part Performance
(Above) Automotive Parts Finished with Isotropic Micro-Finishing. Photo Credit: Mark Riley, BV Products by Dave Davidson...


37 things you can do with Mass Media Finishing (Centrifugal Barrel or Vibratory Finishing) Equipment
Dave Davidson | Deburring Technologist | ddavidson@deburring-tech-group.com | dryfinish.wordpress.com The applications list shown below...

![“Compiled Problems Caused by Burrs and Sharp Edges.” [AEROSPACE INDUSTRY]](https://static.wixstatic.com/media/cbd284_7eefc6c5de5f42fcb08ac7c618a1fcde~mv2.jpg/v1/fill/w_960,h_759,fp_0.50_0.50,q_90,enc_avif,quality_auto/cbd284_7eefc6c5de5f42fcb08ac7c618a1fcde~mv2.webp)
“Compiled Problems Caused by Burrs and Sharp Edges.” [AEROSPACE INDUSTRY]
Feature Photo: Burrs are more than an industrial nuisance. They can be the source of significant problems when not properly removed,...
bottom of page