top of page


High-Energy Centrifugal Iso-Finishing Contract Services for Deburring and Super Iso-Finishing. Infor
For additional information contact the Contributing Editor: Dave Davidson, Deburring/Finishing Technologist | 509.563.9859 |...


Understanding Surface Finishing’s Role in Part Performance and Service Life Improvement
Contributing Editor: Dave Davidson, Deburring/Finishing Technologist 509.563.9859 ddavidson@deburring-tech-group.com | https://dryfinis...


Centrifugal Iso-Finishing and cutting tool edge improvement
ASK ABOUT:FREE SAMPLE PROCESSING | EQUIPMENT | CONRACT FINISHING Contributing Editor: Dave Davidson | Deburring/Surface Finishing...


Change of Surface Stresses (tensile vs. compressive) with Centrifugal Isotropic Finishing
ABOVE: Isotropic Micro-Finishing Photography by Mark Riley, BV Products For process development assistance and free sample processing...


Isotropic Mass Finishing for Surface Integrity and Part Performance
(Photo above: Isotropic Micro-Finishing, Photo by Mark Riley, BV Products) by Jack Clark, Surface Analytics, jack.clark@woodward.com and...


Dry Mechanical Edge and Surface Finishing for Rotating Aerospace Components
by Dr. Michael Massarsky | Turbo-Finish Corporation | 917.518.8205 | michael@turbofinish.com and Dave Davidson | SME Technical Community...


Centrifugal Isotropic Finishing for Improved Part Performance
(Above) Automotive Parts Finished with Isotropic Micro-Finishing. Photo Credit: Mark Riley, BV Products by Dave Davidson...


37 things you can do with Mass Media Finishing (Centrifugal Barrel or Vibratory Finishing) Equipment
Dave Davidson | Deburring Technologist | ddavidson@deburring-tech-group.com | dryfinish.wordpress.com The applications list shown below...

![“Compiled Problems Caused by Burrs and Sharp Edges.” [AEROSPACE INDUSTRY]](https://static.wixstatic.com/media/cbd284_7eefc6c5de5f42fcb08ac7c618a1fcde~mv2.jpg/v1/fill/w_960,h_759,fp_0.50_0.50,q_90,enc_avif,quality_auto/cbd284_7eefc6c5de5f42fcb08ac7c618a1fcde~mv2.webp)
“Compiled Problems Caused by Burrs and Sharp Edges.” [AEROSPACE INDUSTRY]
Feature Photo: Burrs are more than an industrial nuisance. They can be the source of significant problems when not properly removed,...


“Compiled Problems in the Aerospace and Other Industries Caused by Burrs and Sharp Edges.”
(Above: Photo credit: Extrude Hone Corporation) For more information or sample processing of parts contact: Dave Davidson | SME Tech...
bottom of page