top of page

![Application Note: Centrifugal Iso-Finishing for Polishing Larger Tube and Cylinder Interiors [Video]](https://static.wixstatic.com/media/cbd284_e52a4bbdb68545e7a1794a6ac49de04b~mv2.jpg/v1/fill/w_960,h_640,fp_0.50_0.50,q_90,enc_avif,quality_auto/cbd284_e52a4bbdb68545e7a1794a6ac49de04b~mv2.webp)
Application Note: Centrifugal Iso-Finishing for Polishing Larger Tube and Cylinder Interiors [Video]
Contributing Editor: Â Dave Davidson, Deburring/Finishing Technologist | 509.230.6821 | dryfinish@gmail.com | https://about.me/dave.davids...


Stock and Material Removal with High Energy Centrifugal Isotropic Finishing
Edited by Dave Davidson | Deburring/Finishing Specialist | dryfinish@gmail.com Excerpted from SME Technical Paper MR79-569 by J. Bernard...


Changing Surface Stress in Machined and Manufactured Parts
Above: Isotropic Micro-Finishing of High-Performance Crankshafts, Photo by Mark Riley, BV Peoducts Edited by Dave Davidson |...


Isotropic Surface Finishes with Vibratory Finishing
These impeller parts have been isotropically finished and then polished in a two stage process with centrifugal isotropic finishing...


Vibratory Edge/Surface Finishing – Evolving Requirements and Processes (Part 1)
Mass media finishing processes have gained widespread acceptance in many industries, primarily as a technology for reducing the Figure 1...


High Energy Micro-Finishing: Surface Texture Improvement and Surface Integrity for Precision Parts
Need more information? Contact the Contributing Editor: Dave Davidson – Deburring/Finishing Specialist | dryfinish@gmail.com |...


Micro-Finishing and Surface Textures
Dave Davidson | Deburring and Surface Finishing Specialist | ddavidson@deburring-tech-group.com The role of mass finishing processes as a...


TAM Deburring and Surface Finish Machining for Aerospace Engine Parts
by Dr. Michael Massarsky, Turbo-Finish Corporation, michael@turbofinsh.com and Dave Davidson, Society of Manufacturing Engineers,...
bottom of page