Blog | Deburring/Finishing Technical Group

Our Recent Posts

High Speed Mass Finishing for Clear Plastic Orthodontic Aligners. (Deflashing and Edge-Finishing)

Centrifugal Iso-Finishing Technology at the IMTS - 2022 and Sample Part Finishing Instructions

Some Case Study and Application Examples for Centrifugal Iso-Finishing Processes

Tags

37 things you can do with Mass Media Finishing (Centrifugal Barrel or Vibratory Finishing) Equipment

Dave Davidson | Deburring Technologist | ddavidson@deburring-tech-group.com | dryfinish.wordpress.com The applications list shown below...

“Compiled Problems Caused by Burrs and Sharp Edges.” [AEROSPACE INDUSTRY]

Feature Photo: Burrs are more than an industrial nuisance. They can be the source of significant problems when not properly removed,...

Some Compiled Mass Finishing Applications

The applications list shown below was compiled by a major OEM (Original Equipment Manufacturer) of finishing equipment. As you can see by...

Isotropic Mass Finishing for Surface Integrity and Part Performance

Feature photo above: Isotropic Micro-Finishing of Gears by Mark Riley, BV Products Contributing Editor: Dave Davidson |...

“Compiled Problems in the Aerospace and Other Industries Caused by Burrs and Sharp Edges.”

(Above: Photo credit: Extrude Hone Corporation) For more information or sample processing of parts contact: Dave Davidson | SME Tech...

“Topical Case History – Converting from Standard Machined Surfaces to More Functional Surfaces

For additional information contact: Dave Davidson, Deburring/Finishing Technologist | 509.563.9859 ddavidson@deburring-tech-group.com ...

RECOMMENDED READING FOR SME LEAN CERTIFICATION EXAM PREPARATION

Photo Above: Lecture by Dave Davidson at the Lean2Green Pavilion at SME’s EASTEC Conference and Expo at Springfield, MA – Meeting the...

MASS FINISHING EQUIPMENT: Barrel and Vibratory Systems

For additional information or sample processing contact: Dave Davidson | SME Tech Advisor | 509.230.6821 | dryfinish@gmail.com MASS...

What is Mass Finishing ?

ABOVE: Isotropic Micro-Finishing is possible with mass finishing methods. Photography by Mark Riley, BV Products For further information...

Stock and Material Removal with High Energy Centrifugal Isotropic Finishing

Edited by Dave Davidson | Deburring/Finishing Specialist | dryfinish@gmail.com Excerpted from SME Technical Paper MR79-569 by J. Bernard...