Blog | Deburring/Finishing Technical Group

Our Recent Posts

High Speed Mass Finishing for Clear Plastic Orthodontic Aligners. (Deflashing and Edge-Finishing)

Centrifugal Iso-Finishing Technology at the IMTS - 2022 and Sample Part Finishing Instructions

Some Case Study and Application Examples for Centrifugal Iso-Finishing Processes

Tags

Mass Finishing Fundamentals

For more information or technical assistance contact: Contributing Editor: Dave Davidson dryfinish@gmail.comAdvisor: SME Technical Community

Centrifugal Iso-Finishing for Precision Part Deburring and Finishing

by Contributing Editor: Dave Davidson, Deburring/Finishing Technologist | 509.230.6821 dryfinish@gmail.com | https://about.me/dave.david...

Hands-Free Finishing of AM/3DP Metal Parts with High-Speed Centrifugal Iso-Finishing

or further information or to make arrangements for sample part processing contact: Dave Davidson | Deburring/Finishing Technologist....

Measuring and Mapping Surface Textures and Surface Finishes in 3D with SWLI

Article and surface measurement graphics contributed by Jack Clark, Surface Analytics, LLC A Scanning White Light Interferometer (SWLI)...

High Speed, Hands-Free Centrifugal Iso-Finishing for Deburring, Polishing and Super-Finishing

ABOVE: This Model HZ-85 machine is especially well suited for processing lengthy parts, and can also deburr, finish and polish parts in...

Mass Finishing Processes Explained

For more information or assistance with sample part processing for your parts contact the Contributing Editor: Dave Davidson,...

Vibratory Iso-Finishing Down-Under, World-Class Equipment with World-Class Finishing Processing

Photo Credits: Mark Riley, BV Products, Australia Contributing Editor: Dave Davidson, Deburring/Finishing Technologist | 509.563.9859 |...

Turbo-Finish for Lean Deburring and Finishing of Complex Rotating Parts

For information about the Turbo-Finish deburring and finishing technology contact: Dr. Michael Massarsky | Turbo-Finish Corp....

PRECISION MACHINED COMPONENTS: Meeting the Lean Deburring and Finishing Challenge – Case Study

Contributing Editor: Dave Davidson: | dryfinish@gmail.com | 509.563.989 https://dryfinish.wixsite.com/iso-finish |...

High-Speed Isotropic Surface Processing of Racing Engine Components for the Motorports Industry Impr

Above: Isotropic Micro-Finishing Photography by Mark Riley, BV Products Dave Davidson: Contributing Editor | dryfinish@gmail.com |...